Team & Service
Our team is a dynamic,Quickly respond to customer needs, experienced technical team, provide design and customization services.
Wide Range of Applications
Our products are widely used in FTTH (Fiber to the Home) and FTTA (Fiber to the Antenna) applications.
Our Certificates
We have established a quality assurance system compliant with ISO9001 standards. Our products are strictly tested according to IEC, GR-326-Core, GR-3120-Core, GR-771-Core, and GR-1221-Core standards to ensure superior performance and reliability.
Broad Market
Our products are exported to a wide range of Market layout in Asia, Europe, Middle east, North America, South America, Africa.Products are exported over 50 countries, and are widely recognized by customers.
ABS Plastic Box
ABS material is characterized by its resistance to compression, impact, heat, and low temperature.
Compact Size
It is small and compact in size, making it easy to install and handle.
High Stability
ABS PLC splitters have high stability, ensuring that the output power remains constant even over a long period of time.
Low Insertion Loss
PLC splitters have low insertion loss, which means that they do not significantly affect the signal strength as the light passes through them.
Low Polarization Dependent Loss (PDL)
The splitters have low PDL, meaning that they are not affected by the orientation of the polarized light.
Wavelength independence
ABS PLC splitters are wavelength-independent, meaning that they work with a wide range of wavelengths and can be used in various communication systems.
High reliability
It is highly reliable, meaning that it can withstand harsh environmental conditions and are less likely to fail.
|
Wavelength |
1260nm / 1650nm |
|
Split Ratio |
1 x 32 |
|
Fiber Type |
Corning SMF-28e Fiber |
|
Insertion Loss (dB) Max |
<17.0 |
|
Uniformity (dB) Max |
<2.0 |
|
PLD (dB) Max |
<0.3 |
|
Directivity Min |
55dB |
|
Return Loss (dB) Min |
55 (50) |
|
Operating Temperature |
-40 ~ +85°C |
|
Power Handling |
300mW |
PLC splitter often use M×N to indicate that a splitter has M inputs and N outputs. In the FTTx system, M can be 1 or 2, and N can be 2, 4, 8, 16, 32, 64, 128, etc. There are two types of optical splitting in PON network: first-level splitting and second-level splitting.
The first-level optical splitting mode means that the optical splitters are centrally distributed in the optical fiber distribution box, and are directly connected to the OLT at the central office through a single optical fiber, and the other end is connected to multiple ONTs at the user end through multiple optical fibers.
The first-level light splitting method usually chooses a 1×32 optical splitter or a 1×64 optical splitter. Two-stage optical splitting means that two sets of optical splitters are connected between the OLT and the ONU in a cascaded manner. This beam splitting method has two beam splitting points: A primary beam splitting point and a secondary beam splitting point. The first-level splitting point is usually located near the central office, and a 1×4 optical splitter is generally used; the second-level splitting point is generally installed at the user end, and there are multiple optical splitters, generally 1×8 optical splitters are used.
|
Parameters |
1x2 |
1x4 |
1x8 |
1x16 |
1x32 |
1x64 |
2x4 |
2x8 |
2x16 |
|
Operating Wavelength (nm) |
1260~1650 |
||||||||
|
Fiber Type |
Single mode fiber |
||||||||
|
Fiber OD |
250um bare fiber/900um with loose tube/ 2mm with kevlar /3mm with kevlar |
||||||||
|
Insertion Loss (dB) S Grade |
4 |
7.3 |
10.5 |
13.7 |
16.9 |
21 |
4.2 |
7.8 |
11.2 |
|
Insertion Loss (dB) P Grade |
3.8 |
7 |
10.2 |
13.5 |
16.5 |
20.5 |
3.8 |
7.4 |
10.8 |
|
Loss Uniformity (dB) |
0.4 |
0.6 |
0.8 |
1.2 |
1.5 |
2.5 |
1 |
1.4 |
1.5 |
|
Return Loss (dB) S Grade |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
50 |
|
Return Loss (dB) P Grade |
55 |
55 |
55 |
55 |
55 |
55 |
55 |
55 |
55 |
|
Polarization Dependent Loss(dB) |
0.2 |
0.2 |
0.3 |
0.3 |
0.3 |
0.4 |
0.2 |
0.2 |
0.4 |
|
Directivity (dB) |
55 |
55 |
55 |
55 |
55 |
55 |
55 |
55 |
55 |
|
Wavelength Dependent Loss(dB) |
0.3 |
0.3 |
0.3 |
0.5 |
0.5 |
0.5 |
0.8 |
0.8 |
0.8 |
|
Temperature Stability(-40~85 °C)(dB) |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
0.5 |
|
Operating Temperature (°C) |
-40~85 |
||||||||
|
Storage Temperature (°C) |
-40~85 |
||||||||
|
Note |
1) Specified without connectors; 2) Add an additional 0.2dB loss per connector |
||||||||
Fiber to the Home (FTTH) networks
ABS PLC Splitters are used to distribute optical signals from a central point to multiple subscribers in FTTH networks.
Optical LANs (Local Area Networks)
It is used to distribute signals from optical fibers to different end-devices in optical LANs.
Data centers
ABS PLC Splitters are used to route optical signals between different data center components, such as servers, switches, and storage devices.
CATV networks
It is used to distribute optical signals from a headend to multiple subscribers in cable television networks.
Metro and access networks
ABS PLC Splitters are used in metro and access networks to route optical signals between different network elements.
Test and measurement equipment
It is used in test and measurement equipment, such as optical power meters and optical spectrum analyzers.
We're professional abs plc splitter manufacturers and suppliers in China, specialized in providing high quality custom service. We warmly welcome you to buy cheap abs plc splitter from our factory.
Outdoor Fibre Cable, Yellow Fiber Optic Cable, Fiber Wall Outlet(0/10)
