Adss Fiber Cable
Item: ADSS Fiber Cable Outdoor
Model: ADSS fiber optic cable 12 core 24 core 48 core 96 core 144 core 50M Spam 100 Spam ADSS optic fiber cable
Product Name: ADSS Fiber Cable
Fiber Count: 2-288 Cores
Strength Member: Kevlar Yarn
Jacket: Single and Double
Fiber Options: G652D, G657A, OM1, OM2, OM3, OM4
Material of Jacket: Black Polyethylene (PE)
Span: 50/100/150/200/300Meters
OEM: Available
- Product Introduction
ADSS (All-dielectric Self-supporting) optical fiber cable is a type of self-supporting aerial fiber optic cable designed for aerial installation and deployment and is suitable for various outdoor applications. All-dielectric self-supporting optic cable is another name for ADSS fiber optic cable. There are two modes in optical fiber, single-mode and multimode fiber.
The self-supporting type indicates that the ADSS optic fiber cable's reinforcing member can withstand its weight and external load, has high mechanical strength, and can withstand the strong electric environment's impact.
A comprehensive transmission circuit infrastructure with high-reliability performance is provided by the ADSS fiber optic cable system, which includes cables, suspension, dead-end, and termination enclosures.
Product Parameters:
|
Temperature Range |
|
|
Transport/storage temp |
-30℃～+65℃ |
|
Installation temp |
-20℃～+50℃ |
|
Operation temp |
-30℃～+65℃ |
|
Structural Characteristics |
|
|
Fiber count |
2～144 |
|
Loose tube |
Colored fiber in PBT loose tube, filled with fiber gel |
|
Central strength member |
Non-metallic strength member FRP (Fiber Reinforce Plastic Rod) |
|
Waterproof layer |
Cable core filled with cable gel or water blocking tape, water blocking yarns |
|
High-strength aramid yarn |
Offers very high tensile strength, small diameter and light weight to fit different climate conditions and laying spans |
|
Sheath |
Anti-tracking (AT) material or Polyethylene (PE) |
|
Cable Performance Parameter |
|||
|
Span meter |
200 |
300 |
400 |
|
Related Strength Tension (RTS) |
17.5 kn |
20.6 kn |
28 kn |
|
Max Allowable Tension (MAT) |
6.9 kn |
8.2 kn |
11.5 kn |
|
Allowable Crush Resistance |
Long Term: 1100 n/100mm |
Long Term: 1100 n/100mm |
Long Term: 1100 n/100mm |
|
Short Term: 2200 n/100mm |
Short Term: 2200 n/100mm |
Short Term: 2200 n/100mm |
|
|
Minimum Bending Radius |
Operating: 220 mm |
Operating: 220 mm |
Operating: 220 mm |
|
Installation: 360 mm |
Installation: 360 mm |
Installation: 360 mm |
|
|
Temperature Range |
Operating: -40 /+70℃ |
Operating: -40 /+70℃ |
Operating: -40 / +70℃ |
|
Installation: -15 / +60℃ |
Installation: -15 / +60℃ |
Installation: -15 / +60℃ |
|
|
Out Sheath Material |
Electrical Resistance AT (Borealis material 6081) Sheath |
||
|
Note |
ice accretion 5mm, weed speed:30M/S |
||
Features of ADSS Fiber Cable:
• Can be installed without shutting off the power.
• Excellent performance. The maximum inductive at the operating point of jacket can reach 25kV.
• Light weight and small diameter reducing the load caused by ice and wind and the load on towers
• Large span lengths and the largest span is over 200m.
• Good performance of tensile strength and temperature.
• The design life span is over 30 years.
Applications of ADSS Fiber Cable:
ADSS fiber cable was originally derived from military lightweight, rugged deployable (LRD) fiber wires. There are many advantages for ADSS fiber cable.
ADSS fiber optic cable is now used in aerial installations for short-span, typically on roadside power distribution poles, thanks to continuous improvements in technology such as fiber cable internet. Because it is non-metallic, the ADSS fiber cable is ideal for applications near high-voltage power distribution lines, for which it has become a standard.
Circuits up to 100 km long are possible without repeaters using single-mode fiber and light wavelengths of 1310 nm or 1550 nm. ADSS OFC cable was typically used in 48 and 96 cores.
Hot Tags: adss fiber cable, China adss fiber cable manufacturers, suppliers, factory, Splice Closure for Optical Fiber Cable, Dome Closure Heat Shrink, Plc Fiber Splitter, Fiber Faceplate, Multiport Splitter Terminal, Outdoor Splice Enclosure
