MultiPort Flex Terminals
Model: GL-MFT 1x2 Split
MultiPort Flex Terminals is designed for use in outside plant fibre access networks, where a splice-on stub is preferred. In particular, its reliability makes it ideal for FTTH applications. This innovative terminal provides sealed environmental protection, as well as easy incremental connection of subscriber drop cables. This MultiPort Flex Terminal also accelerates FTTH community acceptance through its ability to fit inside some of the most compact pedestals and handholes on the market. It is available in several configurations with 2, 4, 8, and 12 Supertap single-fibre connector ports.
- Product Introduction
MultiPort Flex Splitter with Supertap connector is an advanced solution designed for outdoor fiber optic networks, especially recommended in places where the use of splitters is required. Its reliability makes it an ideal choice for FTTH (Fiber to the Home) applications.
This terminal offers tight environmental protection and allows easy and gradual connection of subscriber cables. It is made of the revolutionary optical fiber, which is bend-resistant and provides minimal signal attenuation. Due to its compact design, the MultiPort terminal fits perfectly into the requirements of small spaces, such as small boxes or telecommunications manholes.
The terminal is available in three configurations: with 1x2, 1x4, 1x8, 1x12 splitters, which allows to reduce initial implementation costs by connecting multiple cables to one optical fiber. Its small profile and small housing make it possible to reduce the cost of construction materials, as well as allow the use of smaller boxes and manholes.
The MultiPort Flex Terminal is equipped with Supertap cable connector ports for maximum installation flexibility, reducing the need for additional repair work in confined spaces and its use in the terminal makes it moisture-resistant and IP68 compliant.
simplifies inventory management and installation.
Structure Diagrams：
Stap (SC/APC) with Supertap Connector 1x2 PLC Splitter
Stap (SC/APC) with Supertap Connector 1x4 PLC Splitter
Features of MultiPort Flex Terminals：
• Low profile, small-form-factor multiport terminal
• Custom length stub, splice-on end
• Factory-terminated polished connectors
• Environmentally secure and rated to IP68
Optical Specifications:
|
Type |
Insertion loss (dB) |
Return loss (dB) |
|
10/90 1x2 Coupler |
≤11.5/1.05 |
≥55 |
|
20/80 1x2 Coupler |
≤8.2/1.6 |
≥55 |
|
30/70 1x2 Coupler |
≤6.3/2.2 |
≥55 |
|
40/60 1x2 Coupler |
≤4.5/3.0 |
≥55 |
|
50/50 1x2 Coupler |
≤3.9/3.9 |
≥55 |
|
1x2 PLC Splitter |
≤4.2 |
≥55 |
|
1x4 PLC Splitter |
≤7.8 |
≥55 |
|
1x8 PLC Splitter |
≤10.9 |
≥55 |
|
1x12 PLC Splitter |
≤12.9 |
≥55 |
|
1x16 PLC Splitter |
≤13.9 |
≥55 |
Application of MultiPort Flex Terminals：
• Multi-purpose Outdoor.
• For connection between distribution box and RRH.
• Deployment in Remote Radio Head cell tower applications.
Hot Tags: multiport flex terminals, China multiport flex terminals manufacturers, suppliers, factory, Fiber Termination Enclosure, Optical Pigtail, Plc Fiber Splitter, Yellow Fiber Optic Cable, Dome Closure Heat Shrink, Vertical Fiber Closure
