LC LC Single Mode Fiber Cable
Model: Switchable Uniboot LC LC Single Mode Fiber Cable, Pull/Push, 9/125, Duplex
These high-speed, push-pull switchable duplex single-mode 9/125µm fiber optic patch cables are terminated with LC connectors on both ends (LC-LC). Commonly referred to as Lucent Connectors, Little Connectors, or Local Connectors, these snap-in connectors are designed for high-density connections and are compatible with plug-and-play applications such as SFP modules and XFP transceivers.
- Product Introduction
LC LC Single Mode Fiber Cable
Achieve quick and easy polarity reversal in the field without tools or risk of damage to optical fibers. This LC-LC Single Mode Fiber Cable is designed with a 2mm round duplex cable to reduce congestion, improve finger access in patch panels, and enhance airflow around active equipment. LC connectors ensure high transmission quality and low optical loss, delivering reliable performance for high-performance networks.
50% Space-saving Uniboot for High Density Applications
The UniBoot Single-Mode Fiber Patch Cable design enhances the effectiveness and flexibility of cable management while saving significant space. It is an ideal solution for high-density applications. Cable assemblies featuring LC duplex UniBoot fiber optic connectors reduce the required space for optical cable infrastructure by half compared to traditional duplex cable products.
Data Center-Grade High-Density Single Mode Fiber Cable with LC-LC Uniboot Push-Pull Connector
This LC patch cable is assembled with data-center-grade duplex LC connectors, making it a high-bandwidth, single-mode duplex fiber patch cable optimized for high-speed 10Gig networks. Its PVC (OFNR)-rated, yellow-colored jacket and 2.0mm diameter are designed for high-density data center environments.
Specifications:
|
Cable Diameter |
2.0mm Round Duplex |
|
Cable material |
LSZH, OFNR |
|
Fiber types |
SM, OM3, OM4 |
|
Cable Jacket Availability |
SM (Yellow), OM4 (Aqua and Erika Violet), OM3 (Aqua) |
|
Materials Compliant |
RoHS, Reach/SVHC |
|
Strength Member |
Aramid |
|
Operating Temperature |
0 to 60°C |
|
Secondary Buffer Diameter |
600 ± 50µm |
|
Minimum Bending Radius |
10D (installed) 20D (loaded)mm |
Features for Uniboot Fiber Optic Patch Cable LC to LC:
1. Reversible Polarity
• Enables simplified polarity correction in the field
• Easy to use push-pull mechanism without exposing bare fibers
2. Small Diameter Patch Cords
• Contribute to improved airflow and reduced cable congestion in the patching area
3. Standard and Reduced Bend Sensitivity
• Applicable to OM3, OM4, and SM fiber types
4. Meet Tight Data Center Power Budgets
• Ceramic ferrule connectors ensure low optical power loss
5. Adjust Fiber Channel Path
• Fix polarity troubleshooting in the field quickly and tool-free
6. Compatible with all LC ports
• Easy insertion and removal to any active or passive LC port
Applications in Data Center:
LC LC Single Mode Fiber (SMF) cables are widely used in data centers for high-speed, long-distance connectivity between switches, routers, and storage systems. Their compact LC duplex connectors enable high-density cabling in space-constrained environments, while SMF's low attenuation and high bandwidth support reliable transmission at 10G/40G/100G+ speeds over kilometers. Ideal for backbone links and cross-connect applications, they ensure minimal signal degradation and future-proof scalability for evolving network demands.
Hot Tags: lc lc single mode fiber cable, China lc lc single mode fiber cable manufacturers, suppliers, factory, Multiport Service Terminal, Outdoor Fiber Optic Cables, Fiber Terminal Box, Mpo Fiber Cable, Outdoor Fiber Cable, Mpo 12 Cable
