FTTR Cable Assemblies Patch Cord
Model: 1-4 core FTTR cable assemblies Patch Cord
FTTR cable assemblies are patch cords or pigtails assembled using a new kind of small OD micro-beam cable or air-blown cable, with conventional LC connectors or air-blown LC connectors.
- Product Introduction
Air blow LC connector V1.0 1-4 core FTTR cable assemblies Patch Cord
FTTR Cable Assemblies Patch Cord are pre-terminated fiber optic jumpers specifically designed for Fiber-to-the-Room (FTTR) networks, connecting indoor optical network terminals (ONUs) to wall outlets or splitters within residences or offices. Featuring duplex connectors (typically LC/UPC) and utilizing bend-insensitive single-mode fiber (G.657.A1/A2) within a slim, flexible jacket, they enable easy installation and reliable, high-bandwidth transmission for direct fiber connectivity to individual rooms. Their factory-terminated ends ensure plug-and-play simplicity and low insertion loss.
Cable Details
4F Microbeam module Cable-2.2mm For example.
Other cables are available
Standard color of 250um bare fiber
The color code of the individual 250um bare fiber shall be in accordance with the table as below
Specifications of FTTR Cable Assemblies Patch Cord:
|
Connector |
Air blow LC connector V1.0 |
Polish |
APC |
|
Fiber Mode |
9/125μm, G657A2&G657B3 |
Jacket Color |
Black/White/Grey/Ivory |
|
Main Cable OD |
2.0mm-2.4mm |
Wavelength |
SM:1310/1550nm |
|
Cable Structure |
1F/2F/4F |
Jacket Material |
LSZH |
|
Insertion loss |
≤0.3dB (IEC Grade C) ≤0.12dB (IEC Grade B) |
Interchangeability &Vibration |
≤0.2dB |
|
Return loss |
SM APC ≥ 60dB(min) |
Operation & Storage temperature |
-40~85°C |
3D Geometric Specification:
|
Items |
Parameter |
||
|
Polishing |
PC |
APC |
|
|
ROC |
SC/FC/ST |
10 ~ 25 |
5 ~ 12 |
|
LC/MU |
7~ 25 |
5 ~ 12 |
|
|
Apex Offset |
≤ 50 |
||
|
Fiber Spherical Height |
±100 |
||
|
Angle |
± 0.5 |
8 ± 0.5 |
|
Remark: The 3D pass rate of the connector end face is 80%)
Ferrule Endface:
|
Zone |
Range (μm) |
Scratches |
Defects |
Reference |
|
A: Core |
0 ~ 25 |
None |
None |
IEC 61300-3-35:2015 |
|
B: Cladding |
25 ~ 115 |
None |
None |
|
|
C: Adhesive |
115 ~ 135 |
None |
None |
|
|
D: Contact |
135 ~ 250 |
None |
None |
|
|
E: Rest of ferrule |
None |
None |
||
FTTR Cable Assemblies Patch Cord Details:
|
Items |
Data |
||
|
Number of fibers |
1-2F |
4F |
|
|
Fiber type |
SM G657A1, G657A2, G657B3 |
||
|
Microbeam module |
Diameter(mm) |
1.1±0.1 |
1.1±0.1 |
|
Color |
White |
||
|
Material |
LSZH (CPR Level: Eca, Dca, Cca B2ca) |
||
|
Outer sheath |
Material |
LSZH (CPR Level: Eca, Dca, Cca B2ca) |
|
|
Color |
White |
||
|
Diameter(mm) |
2.2±0.1 |
||
|
Strength member |
Material |
Aramid yarn |
|
Mechanical & Environmental Performance:
|
Item |
Contents |
Value |
|
Max. tensile load |
Short term |
400N |
|
Long term |
100N |
|
|
Max. crush resistance |
Short term |
500N/100mm |
|
Long term |
100N/100mm |
|
|
Min. bending radius |
Installation |
20 x cable diameter |
|
Operation |
10 x cable diameter |
|
|
Temperature range |
Operation |
-20℃ ~ +70℃ |
|
Installation |
-20℃ ~ +60℃ |
|
|
Storage/transportation |
-20℃ ~ +70℃ |
How to Assemble the Air blow LC connector V1.0 of FTTR Cable Assemblies Patch Cord ?
Application:
Hot Tags: fttr cable assemblies patch cord, China fttr cable assemblies patch cord manufacturers, suppliers, factory, Fiber Optic Patch Cable, Fiber Optic Patch Cord, Fiber Optic Patch Cords, Fiber Patch Cord, Optic Patch Cable, Optical Patch Cord
