Mpo Mtp Cable
Model: MPO/MTP Harnesses Cables 12 Core
MTP / MPO harness assemblies are used to fanout the 8-, 12-or 24-fiber MTP connectors terminated on trunk cables into LC connectors. It is used to transitioning from trunk backbone assemblies to fiber rack system. Providing excellent installation convenience and longer lifespan.
- Product Introduction
MPO/MTP Harness Cable Assemblies are pre-terminated 8 or 12-fiber cable assemblies. The design of the Connector allows for rapid gender and polarity change in the field and enables a seamless, standards-compliant migration from duplex based applications (e.g. 10G Ethernet) to parallel optics-based applications (e.g. 40/100G Ethernet). LC push-pull connectors reduce cable density by 40% and allow easy removal in high density installation. All cable assemblies are factory terminated and tested to deliver verified optical performance and reliability for improved network integrity.
MPO/MTP Harness Cable Diagrams:
Patch Cord Tolerance Requirement:
|
Overall length (L) (M) |
Length of tolerance(CM) |
|
0＜L≤20 |
+10/-0 |
|
20＜L≤40 |
+15/-0 |
|
L＞40 |
+0.5%L/-0 |
MPO MTP Cable Structure:
Cable Parameters:
|
Fiber account |
OD (mm) |
Nominal Weight (kg/km) |
Max. tensile Strength (N) |
Max. Crush Resistance (N/100mm) |
Min. Bending Radius (mm) |
|||
|
Short- term |
Long-term |
Short-term |
Long-term |
Short-term |
Long-term |
|||
|
12 |
3.0±0.15 |
7.0 |
180 |
90 |
500 |
150 |
20D |
10D |
MPO&MTP Optical Characteristics:
|
Item |
Parameter |
Reference |
|||
|
Single mode |
Multimode |
||||
|
Standard |
Elite |
Standard |
Elite |
||
|
Insertion loss |
Typical≤0.30dB Max≤0.75dB |
Typical≤0.15dB Max≤0.35dB |
Typical≤0.50dB Max≤0.25dB |
Typical≤0.10dB Max≤0.35dB |
IEC 61300-3-34 |
|
Return loss |
≥ 50dB (PC) ≥ 60dB (APC) |
≥ 55dB (PC) ≥ 65dB (APC) |
≥30dB (PC) |
≥30dB (PC) |
IEC 61300-3-6 |
MPO MTP Cable Mechanical Characteristics:
|
Test |
Conditions |
Reference |
|
Endurance |
500 mating |
IEC 61300-2-2 |
|
Vibration |
Frequency: 10 to 55Hz, Amplitude: 0.75mm |
IEC 61300-2-1 |
|
Cable retention |
400N (main cable); 50N (connector part) |
IEC 61300-2-4 |
|
Strength of coupling mechanism |
80N for 2 to 3mm cable |
IEC 61300-2-6 |
|
Cable torsion |
15N for 2 to 3mm cable |
IEC 61300-2-5 |
|
Fall |
10 drops, 1m drop height |
IEC 61300-2-12 |
|
Static lateral load |
1N for 1h (main cable); 0.2N for 5min (ranch part) |
IEC 61300-2-42 |
|
Cold |
-25°C, 96h duration |
IEC 61300-2-17 |
|
Dry heat |
+70°C, 96h duration |
IEC 61300-2-18 |
|
Change of temperature |
-25°C to +70°C, 12 cycles |
IEC 61300-2-22 |
|
Humidity |
+40°C at 93%, 96h duration |
IEC 61300-2-19 |
Features:
• Mpo Mtp Cables are 100% pre-terminated and tested in factory to ensure transfer performance.
• Rapid configuration and networking, reduce installation time.
• Supports 40G and 100G network applications.
• Cable Jacket material: LSZH, OFNR, OFNP available.
• Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products are available
Applications of Mpo Mtp Cable:
• Data communication network.
• Optical System Access network.
• Storage area networking fiber channel.
• High density architectures.
Hot Tags: mpo mtp cable, China mpo mtp cable manufacturers, suppliers, factory, Fiber Termination Box, Fibre Optic Distribution Box, Fiber Mtp Cable, Yellow Fiber Cable, Adss Fiber Cable, Outdoor Cable
