MPO 12 Fiber Cable

 

12 Fiber MTP/MPO-SC OM3 Breakout Cable, 3.0mm Patch Cord

​

This 12 Fiber MTP/MPO-SC OM3 Breakout Cable is commonly applied in dense network setups like data centers, FTTB deployments, optical distribution modules, and 40G/100G transceiver systems. It supports adaptable links between varied devices and components, ensuring signals reach targeted pathways efficiently.

 

The ​​MPO 12 Fiber Cable​​ bridges MPO connectors to SC ports using 12 optical strands. Built for compact fiber networks, it simplifies splitting MPO-based high-density links into individual SC ports. Ideal for telecom hubs, data centers, and fast network systems, it streamlines connectivity where MPO-to-SC channel distribution is critical.

 

Specifications of MPO 12 Fiber Patch Cable:

 

Type	Single Mode		Single Mode		Multi Mode
	(APC Polish)		(UPC Polish)		(PC Polish)
Fiber Count	8,12,24 etc.		8,12,24 etc.		8,12,24 etc.
Fiber Type	G652D, G657A1 etc.		G652D, G657A1 etc.		OM1, OM2,OM3 etc.
Maximum Insertion Loss	Elite	Standard	Elite	Standard	Elite	Standard
	Low Loss		Low Loss		Low Loss
	≤0.35 dB	≤0.75dB	≤0.35 dB	≤0.75dB	≤0.35 dB	≤0.60dB
Return Loss	≥60 dB		≥60 dB		NA
Durability	≥500 times		≥500 times		≥500 times
Operating Temperature	-40℃ ~ +80℃		-40℃ ~ +80℃		-40℃ ~ +80℃
Test Wavelength	1310nm		1310nm		1310nm

Model	Parameter
Physical Properties	MPO 12 Fiber Cable MTP/MPO-SC OM3 Breakout Cables 3.0mm Patch cord
Fiber Count	12 Fibers
Fiber Mode	OM3
Connector Type	Connector A: US Conec MTP/OPTICO MPO;
	Connector B: LC/SC/FC/ST
Polarity	Type A/B/C
Cable Jacket	PVC/LSZH/OFNP
Cable Diameter(mm)	3.0
Minimum Bend Radius	7.5
Fiber and Boot Length	Customizable

 

Features:

 

• High-Density Connectivity​​
MPO 12 cables pack 12 fibers into a compact connector, cutting clutter by 90% and boosting port density for 40G/100G/400G networks in space-constrained data centers.

​​• Plug-and-Play Deployment​​
Pre-terminated with push-pull connectors, they enable rapid installation, reducing labor costs and downtime during network upgrades or maintenance.

• ​​High-Speed Performance​​
Supports 10G to 400G speeds with low loss (≤0.5 dB). OM3/OM4/OM5 multimode for short links, OS2 single-mode for long-haul transmission.

• ​​Scalability & Flexibility​​
Modular design allows upgrades via polarity management (Type A/B/C) and breakout harnesses for backward compatibility with legacy LC/SC systems.

​​• Durability & Standards​​
Robust ceramic ferrules endure 500+ cycles, compliant with IEC/TIA standards, and compatible with Cisco/Juniper hardware in harsh environments.

 

Applications:

 

The application of MPO 12 Fiber Patch Cable with a 3.0mm outer diameter patch cord involves high-density fiber optic connectivity in data centers, telecommunications networks, and enterprise environments. This cable is designed to interconnect MTP/MPO multi-fiber trunk systems (12 fibers) with individual SC duplex connectors, enabling efficient distribution of high-speed optical signals.

 

More Choices:

FAQ:

 

1 How to Measure the Quality of MPO 12 fiber cables?

 

• After MPO cables are produced, they undergo cleaning and assessment via microscopic and geometric inspections to ensure cleanliness and high quality.
• A VIAVI MPO test device is used to measure light transmittance, verifying that the fiber connectors meet standard values.
• For the measurement, the following components are required: 1 jumper cable connected to the device,1 master cable (selected based on the type of cable being measured), the DUT (Device Under Test) cable.
• Before testing, all cables must be thoroughly cleaned, and the master cable must be properly selected for compatibility.
• The DUT cable is then connected to the master cable and the test device. The device provides a precise final measurement result once the test is complete.

 

 

Hot Tags: MPO 12 Fiber Cable, China MPO 12 Fiber Cable manufacturers, suppliers, factory, Fiber Splice Closure, Fibre Optic Enclosures, Adss Optical Fiber Cable, Aerial Splice Enclosure, Subscriber Terminal Box, Small Fiber Enclosure