FPV Fiber Module
Model: FPV Drone Fiber Module Version 1.0-S 1KM/2KM/3KM/5KM
- Product Introduction
FPV Fiber Module- Ground Station with Fiber-Optic Image Data Module and Optical Link to Sky Endpoint
The FPV Fiber Optic Module is a compact fiber optic communication device designed for First Person View (FPV) UAVs. At its core lies a rugged black cylindrical shell containing hundreds or thousands of meters of fine optical fiber. The FPV Fiber Module is typically mounted on a drone, unspooling its fiber optic cable slowly after takeoff. Its primary function is to establish a highly secure, anti-interference, low-latency physical data link between the operator and the drone. In dense electronic countermeasure (ECM) environments-where traditional wireless links often fail or are disrupted - the fiber optic module ensures the continuous, covert transmission of critical real-time, high-resolution video feeds and control commands. This significantly improves communication stability and operational survivability in complex electromagnetic conditions.
Specifications:
|
Model |
FPV Drone Fiber Module Version 1.0-S |
|
Fiber Length |
1KM/2KM/3KM/5KM |
|
Size |
91mm(diameter) x 345mm (fiber output nozzle) |
|
Housing Material |
Acrylonitrile-styrene-butadiene copolymer |
|
Weight |
1km-0.36kg/ 2km-0.42kg/ 3km-0.48kg / 5km-0.6kg (include sky unit) |
|
Outlet Nozzle Material |
Aluminum alloy |
Schematic diagram of the installation angle:
Important Notes:
• During the installation of FPV Fiber Module, position the module's outlet as far as possible from the propeller. However, special attention must be paid to maintaining the aircraft's center of gravity balance.
• The installation of the FPV fiber module must account for the aircraft's inclination angle. The mounting bracket should incorporate a specific inclination angle (as shown in the figure), closely matching the aircraft's angle of inclination to ensure the fiber optic cable's exit point is horizontal.
• Special glue is used for the fiber winding process. Approximately the first 200 meters of the fiber is designated as the gluing area. Within this area, the aircraft's flight speed must be controlled to under 30 km/h (8 m/s). High-speed flight must be avoided in the gluing area.
• The aircraft's maximum flight speed must be controlled to under 120 km/h.
• The fiber optic cable must not be exposed to water, otherwise signal attenuation will occur, reducing optical transmission quality.
Hot Tags: fpv fiber module, China fpv fiber module manufacturers, suppliers, factory
