Terminal Box Installation

1. The installation location, installation method, and height of the information module, multi-user fiber optic cable terminal box, and assembly point wiring module should meet the design requirements.
2. When installed inside the raised floor or on the ground, it should be fixed inside the junction box. The information panel should be in a vertical and horizontal form. The junction box cover can be opened and should have waterproof, dustproof, and pressure resistant functions. The surface of the junction box cover should be flush with the ground.
3. When installing information modules and power sockets at the bottom of the terminal box, the spacing and protective measures taken should meet the design requirements.
4. The fixing method for the base of the terminal box should be determined based on the specific conditions of on-site construction, which can be installed using expansion screws, shooting nails, and other methods. The fixing method for the bottom box of the information module installation should be determined according to the conditions of the construction site.
5. Do the fixing screws need to be tightened? There should be no looseness. The installation of the base, information module, and panel should be firm and stable, without any looseness, and the panel should be kept in a horizontal plane? Be aesthetically pleasing and tidy.
6. The fiber optic cable terminal box installed on the wall should be positioned about 300mm above the ground. When using raised floors on the room floor. The terminal box should be 300 mm away from the surface of the raised floor.
7. Should various socket panels be labeled? Use colors, graphics, and text to represent the type of business of the connected terminal equipment.
8. Should there be sufficient space in the bottom box for the installation of fiber optic connection devices and adapters for terminating optical cables in the work area? And it should meet the design requirements.